5
2.
To toggle between Trip and ODO: Double click the up arrow for ODO. Double click the
down arrow for Trip.
3.
To reset the Trip: When the bike is turned on, double click the on/off button whilst the
bike is in Trip function.
4.
To turn lights on or off: Press on/off button, the bike must be turned on for the lights to
operate.
5.
To change from KM to Miles and visa versa: Hold the Power and down arrow for three
seconds.
6.
To engage walk assist: Push the down button (V) for 3 seconds and hold. The bike will
move forward at 4mph or 6km/h. Alternatively twist the throttle, as long as the pedals
are not turning forward the bike will stop accelerating at 4mph.
2.1.9 To avoid unplanned acceleration, always make sure that the LCD assist level is set to
minimum and the single bar is flashing when mounting and dismounting. Turn the bike off
when leaving it unattended.
2.1.10 For further information regarding the LCD display please refer to the Wisper web pages.
https://wisperbikes.com/tutorials/
2.1.11 Remember to validate your warranty by visiting https://wisperbikes.com/support/register-
your-e-bike/ and filling in your details.
IMPORTANT
Riders over 6
′
or 182cm tall, must ask for 400mm seat-post when ordering. If the saddle is used
with the seat post outside the limit makes serious damage and injury may take place. If there is no
limit mark printed on the seat post please contact your supplier who will supply a new seat post.
2.2
Before each use
It is important you check your bike prior to each time you use it. Checks should include the following:
If you do find any damage or problems, do not use the bike until the problem has been solved or you
have had the faulty item checked and changed or repaired by an electric bike mechanic or your
retailer.
2.2.1
Check the tyres for any visible damage.
2.2.2
Check tyre pressures. The pressures are shown on the side wall of the tyres fitted to
your bike.
2.2.3
Check for any loose nuts, bolts or fixings.
2.2.4
Check the brake functions.
2.2.5
Check the electronic functions.
2.2.6
Check the reflectors are in place and the lights are working.
2.2.7
Check the battery for any visible signs of damage.
