p. 64
•
Pull the brake cable back slightly.
•
Tighten the screw by turning it counter-clockwise.
•
Repeat if necessary to fine-tune it
•
7.3.2 Maintenance of screws:
Check the screws of each part carefully before using the scooter. The screws
must not be loose or too damaged.
7.3.3 Adjusting the Stem:
If you feel vibrations while riding, you may need to
check the tightness of the wheel.
Lift up the plastic tabs at the bottom of the
stem on the deck side.
Use the Allen key to tighten the screws.
Note
: Check that the scooter is functioning normally before each use. If there is a
problem, do not use it and contact the service department to have it repaired. Never
modify the structure of the scooter. Any modification may result in a risk of injury, and
the manufacturer will not be liable for any damage resulting from this type of
modification.
WARNING!
•
To ensure your safety, never disassemble your scooter, otherwise your
warranty will be void.
