Radiar ARD32 room controllers can be connected with DT6 (dimmable/single
channel drivers) and DT8 (tunable/multi-channel drivers)
Steps involved
Connect the Line and Neutral wires from the mains into the AC Line and AC Neutral
connector of the DALI Room Controller
Similarly power the drivers from the mains supply by connecting the Line and Neutral
wires into the Line and Neutral wires/connectors of driver
To control the drivers, connect the DALI+ and DALI- wire from the nearest driver to the
DALI+ and DALI- connectors of the controller. (DALI lines are polarity insensitive)
Run the DALI+ and DALI- wires from one driver to the next driver’s DALI+ and DALI-
connectors/wires. Up to 32 drivers can be connected to Radiar ARD32 controller.
(Ensure the DALI cable runs not beyond 300m max from the starting point.)
Do not exceed maximum wattage, ratings, or published operation conditions of
product
Do not overload
Follow all manufacturer’s warnings, recommendations and restrictions to
ensure proper operation of product
WARNING – Risk of Burn or Fire
LED Driver
DALI
N
Neutral
DALI
DALI
DALI
DALI
DALI
DALI
Line
Neutral
Line
Neutral
Line
LED Driver
DALI
LED Driver
DALI
L
12 VDC
12VDC Powerpack
GND
GND
3VDC
-
+
2
1
LED Driver
0-10V DIM
N
Neutral
DIM 1 +
DIM 2 +
DIM -
Line
L
Wiring
LED Driver
DALI
N
Neutral
DALI
DALI
DALI
DALI
DALI
DALI
Line
Neutral
Line
Neutral
Line
LED Driver
DALI
LED Driver
DALI
L
Take in the DALI wires from the driver
through the connector on the box and
connect them to the DALI push-in
connectors on the device. Also, take out
the wire antenna through the same
connector
Take in the AC wires from the Mains
through a connector (in the box) and
connect to the AC Line(Brown) and AC
Neutral(Blue) push-in connectors in the
device.
Cover the box with using screws
Fix this box onto a flat surface
3
4
5
6
Connecting 0-10V drivers to the
Radiar ARD32 controller (in 0-10V mode)
Connecting DALI drivers to the
Radiar ARD32 controller
Connecting an external sensor with 0-3V output
to the Radiar ARD32 controller using a Molex connector
