Wisi MICRON MyM Pro, Руководство по установке

Страница: 12 / 24

MENUES AND SETTINGS
12
5.3 OUTPUT SETTINGS
5.3.1 MODULATION
BAND
Start the output setup by selecting which band you want to use. You can select [VHF-7/8 CCIR], [VHF-8
OIR] , [UHF-7 CCIR] or [UHF-8]. After selection press [Set].
FREQUENCY
For each of the 3 (or 6) possible RF output channels, set the
desired output channels by using [Channel name] scroll list
or write the frequency.
[Modulator enabled] can be set to “OFF” to switch off the
RF out.
There is receiving information of Running status, ONID, TSID and SID
for each Modulator/Decoder after that Services has been selected in
the Service management.
If only A/V out shall be used one
must first set Modulator to ON to be
able to do decoder settings and after
that Modulators can be switched OFF.
The MyM Pro MICRON
provides DSB modulation
so you can’t use adjacent
channels.