www.
©WISI Communications GmbH & Co. KG
5 - 8
www.wisi.de
3.2
Add and configure outputs - Output View
3.2.1
Add single IPTV output
1.
Go to Outputs and click on ADD OUTPUT
2.
In the Output, select IPTV in the drop down list for Choose output type and Single as Create
mode
3.
Select On for enable the output or Off for disabled.
4.
Enter a name for the output
5.
Select protocol, UDP or RTP
6.
Select the bit rate mode, CBR or VBR
7.
Set the output bit rate (for CBR)
8.
Select Network interface
9.
Set the destination (streaming) address and port.
10.
Click the “yellow tick”
to save the settings
3.2.2
Add multiple IPTV outputs
1.
In the Output, select IPTV in the drop down list for Choose output type and Multiple as Create
mode
2.
Enter the number of IP outputs you want to create
3.
Select the property to increment (Destination address or Port)
4.
Select protocol, UDP or RTP
5.
Select the bit rate mode, CBR or VBR
6.
Set the output bit rate (for CBR)
7.
Select Network interface
8.
Set the destination (streaming) address and port.
9.
Click the “yellow tick”
to save the settings
