Wiseup WIFI39, Руководство пользователя, Страница: 1 / 84

WIFI39
User Guide
I. Product Overview
1. Camera Lens
2. IR LEDs
3. Speaker
4. USB Port
II. What’s in the Box
-1× WIFI Hidden Camera Alarm Clock
-1× USB Cable
-1× AC110-240V to DC5V Power Adapter
-1× Disguise Sticker for Camera Lens
-1× 16GB Micro SDHC Class10 SD Card (fitted in the micro SD card slot already)
III. Get Camera Ready
3.1. Please make sure the camera is fully charged and the Micro SD card has been formatted
already and is securely fitted into the camera’s SD card slot, or it will not work. We recommend
that you use a SDHC Class 10 Micro SD card.
3.2. Before using the camera, please remove the plastic film pasted on the screen. And paste
the disguise sticker on the screen to make the camera lens and IR LEDs totally invisible to the
naked eyes.
3.3. If you need the camera to work 7/24 hours, connect it to an outlet AC power supply using
the USB cable and DC 5V power adapter included.
3.4. Slide the Power Switch to the ON Position to power on the camera. When the red indicator
light starts flashing and the blue indicator light remains solid, it means the WIFI signal is ready.
3.5. Scan the QR code below to download the mobile application “
iMiniCam ” on your smart-
phone phone or tablet PC.
IV. Network Setup
4.1. LAN (P2P) Mode Setup
4.1.1. Go to the WIFI or WLAN setting page on your phone or mobile device, connect to the
camera’s WIFI signal named “
CH****** ”.
[Note]:
If the camera’s WIFI signal refuses to show up after a long time, please recharge the camera
or use a pin to reset the camera (See VIII).
4.1.2. Launch the “ iMiniCam ” APP. The camera will show “ Online ” in a couple of seconds,
meaning the camera’s P2P (LAN) setup is successful. You can check or record video in the
P2P (LAN) mode.
[Note]:
In this P2P (LAN) mode, you can only view video locally, within 15 meters (49 feet) open range.
On the live video screen, you can gently put your index finger and thumb on the screen then slide in
and outward directions on a specific area to zoom in and out.
4.2. Remote View Setup (WAN Mode)
>> Before remote view setup, please make sure that the camera is successfully added to the
APP and it's online in P2P (LAN) mode.
4.2.1. Launch the “ iMiniCam ” APP.
4.2.2. Set up remote view function as below:
Step 1: Tap the setting icon on the “
Live video ” page then choose " Advance Config " or
“
Device Settings
”.
Step 2: Go to “ WIFI Config ” page, and select a desired WIFI hotspot to enroll the camera in.
Step 3: Tap “ OK ” to complete the remote view setup and the camera will reboot automatically.
[Note]:
When the WIFI configuration is complete, the camera will say “ WIFI Completed ”.
How to check if remote view function works?
1. Exit the “
iMiniCam
” APP.
2. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your phone or
mobile device from the current WIFI network, enroll your phone or mobile device in another
WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your mobile network data
instead.
3. Launch the “
iMiniCam ” APP again. If the camera shows “ Online ” on the “Live video” page,
it means the remote view setup is successful and the camera has entered into WAN mode.
Both red and blue indicator lights will stay illuminated. You can go ahead to view live video or
record video remotely.
V. Motion Detection Recording Setup
>> Please make sure that the camera is added to the APP in LAN or WAN mode before you
start.
5.1. Launch the “
iMiniCam ” APP.
5.2. Tap the setting icon on the “Live video” page then choose "Advance Config" or “Device Set-
tings”.
5.3. Go to “
Alarm Config ” page, choose your desired motion sensitivity and set an alarm
schedule. Turn on “ Warning Tone ”, “ Pushing Notifications ” and “ On-Screen Display ” if you
want to. Tap “ OK ” to complete the alarm settings.
5.4. Go back to the previous page, click “
SDCard Record Config
” where you can choose “
On
alarm ” recording mode. You can set the video resolution and file length if you want to.
5.5. When motion is detected, the camera will push an alarm message to your phone or mobile
device, take 3 pictures in succession.
5.6. Click “
Record
” at the bottom of the screen and choose “
Remote SD Card
” or to check
out the video clips triggered by sensing movement.
VI. Recording Video to Smartphone or Tablet PC
>> Please make sure that the camera is added to the APP in LAN or WAN before you start.
6.1. Launch the “
iMiniCam
” APP. Tap the camera icon to get into the live video screen.
6.2. Tap the record button and audio button to start or stop recording video.
For Android users, the video files will be saved on your mobile device's flash memory. For IOS
users, the video files will be only saved in the APP “
iMiniCam
”.
6.3. Back to the “
Live video ” page, tap “ Record ” at the bottom of the screen and then tap
" Local " or to check out the video files.
VII. Recording Video to Local Micro SD Card
>> Please make sure that the camera is added to the APP in LAN or WAN mode before you
start.
7.1. Launch the “
iMiniCam
” APP.
7.2. Tap the gear icon on the “ Live video ” page, then select " Advance Config " or “ Device Set-
tings ”.
7.3. Go to “
SD Card Record Config
” page, then set a desired recording mode and file length.
7.4. Tap “ OK ” to complete the SD card recording setting and the camera will record video to the
Micro SD card continuously.
7.5. The video files will be saved in the Micro SD card of this camera. You can check out the
video files by following chapter 5.3.
VIII. Resetting
If for any reason, the camera stops working or isn’t working properly, you can reset the camera
to restore it back to normal operation.
Operation:
When the camera is powered on, use a pin to press and hold the Reset Button for
5 seconds until the camera says “ Reset Completed ”. The camera will reboot automatically
with default settings automatically.
IX. Changing Password
9.1. Launch the “
iMiniCam
” APP.
9.2. Tap the gear icon on the “ Live video ” page, tap " Advance Config " or “ Device Settings ”,
then go to " Change P2P access password " or “ Change password ” page.
9.3. Enter the default password “
8888
” at first, then enter a new password and confirm it, tap
“ OK ” to save the change.
X. Charging
Connect the camera to an outlet AC power supply using the included power adapter and USB
cable.
It will take 3 hours to obtain a full charge. The camera can record video up to 2 hours on a
single charge.
Frequently Asked Questions
Q1: Why can’t I find the camera’s WIFI signal on my smartphone or tablet PC?
A1: There are 3 solutions to this question:
1. Recharge or reset the camera (See VIII).
2. Keep your phone or mobile device within the camera’s WIFI hotspot range, refreshing the
WIFI signal page. It may take up to 1 minute for the hotspot to become recognizable on your
phone or mobile device's WIFI setting page.
3. Shut off your phone or mobile device’s WIFI function for a while, then turn it on to search
again.
Q2: The camera does not record any video to the Micro SD card?
A2: Please power off the camera, take out the Micro SD card and format it, then insert it to the
SD card slot and power on the camera again.
Q3: Why does the WAN mode setup fail?
A3: Please make sure your network is in a good condition. Plus, the WIFI network the camera
is configured with can’t be the same with the one you connect your phone to.
Q4: What can I do if I forget the login password?
A4: Please reset the camera. (See VIII)
Q5: The APP cannot find the camera’s UID after choosing “Search (LAN)”?
A5: Ensure your phone or mobile device is still connecting to the camera’s WIFI signal. Ensure
your camera is powered by the workable outlet power supply.
Q6: Why live video screen shows up black and a searching circle spins in center but
nothing ever displays?
A6: a. If your camera is connected to a slow WIFI network, wait 10-30 seconds for live video to
re-appear.
b. On the live video page, select a suitable resolution according to the real time network envi-
ronment.
Q7: How to turn on the IR LEDs?
A7: On the live video screen, click bulb icon to turn on the IR LEDs.
Q8: How many mobile devices can connect to the camera at the same time?
A8: No limit.
Q9: There is only 1 user, but the camera shows 2 or more users?
A9: a. If you login in very often, the last login record is still in. If you check it every 2-5 minutes,
the camera will show surely the exact numbers of users;
b. For your safety and privacy, please change camera's password for the fi¬rst time use.
Q10: How many cameras are supported on the mobile application?
A10: No limit.
Q11: Is there any PC client software I can use on my computer?
A11: Please click the PC client software download link and download the zip file on your PC:
h t t p : / / w w w . w i s e u p s h o p . c o m / v a r / d o w n l o a d f i l e / W I F I 3 9 % 2 0 W i f i % 2 0 -
Network%20Security%20Camera%20Alarm%20Clock%20PC%20Client%20Software%20for
%20Windows.zip
Q12: The camera is not holding my WIFI settings and continues to show that the camera
is offline?
A12: Make sure the camera is inside the range of good WIFI signal. Or check if the power
socket works well or there is a power cut.
Q13: Will the camera still work if the power goes out?
A13: If it is in WAN mode, it will not work until Internet access is available. If it is in LAN mode
and the backup battery is sufficient, the camera will work the same until the battery runs out.
Q14: How to add the camera to more devices?
A14: Make sure that camera is in WAN mode already. Then launch the “ iMiniCam ” APP on
your other Android phones or tablet PCs, tap “
+
” icon, input the camera UID (a unique combina-
tion of numbers and letters specific to your camera) or the QR code that sticks on the body of
the blub camera. Finally, tap “
OK ” to add the camera to the APP.
Q15: What media player software should I use to play back the video files on my comput-
er?
A15: Click the link: http://www.videolan.org/vlc/index.html to download and install VLC player to
play back video files on your PC or Mac computer.
5. Reset Button
6. Power Switch
7. Red/Blue Indicator Light
8. Micro SD Card Slot