BC303
User Guide
I. Product Overview
1. Camera Lens
2. Red Indicator Light
3. Blue Indicator Light
4. IR LEDs
5. Power Indicator Light
6. Micro SD Card Slot
7. Reset Button
II. What’s in the Box
-1× Bulb Camera
-1× Remote Controller
-1× Card Reader
-1× 20cm E27 Bulb Extension Adapter
-1× 8GB Micro SD Card (fitted into the SD card slot already)
III. Operation
>> Please make sure the Micro SD card (4GB-64GB) has been formatted
already and is securely fitted into the bulb’s SD card slot, or it will not work. A
SDHC Class 10 Micro SD card is recommended. If no Micro SD card is fitted into
the bulb camera, the blue indicator light will keep flashing.
>> Screw the bulb into a standard E27 light socket.
>> Please remove the insulating film from the bottom of the remote controller.
3.1. POWER ON/OFF
3.1.1. The bulb camera will be powered on automatically when connected to an
outlet power supply. The power indicator light will be solid red. Both red and blue
indicator lights will be illuminated for 7 seconds. Then the red indicator light will
turn off, while the blue one will blink twice and turn off. The camera will start
recording video automatically.
3.1.2. Power off the camera by pressing the Power Button once. Both the red
and blue indicator lights will flash twice quickly and turn off.
3.2. VIDEO RECORDING
3.2.1. The bulb camera will be powered on automatically when connected to an
outlet power supply. The power indicator light will be solid red. Both red and blue
indicator lights will be illuminated for 7 seconds. Then the red indicator light will
turn off, while the blue one will blink twice and turn off. The camera will start
recording video automatically.
3.2.2. Press the Video Recording Button once to stop recording video. The blue
indicator light will stay illuminated, indicating the camera has entered into
standby mode.
3.2.3. Press the Video Recording Button once again to resume video recording.
The blue indicator light will blink twice and turn off.
[Note]:
1). A video file will be generated and saved every 5 minutes automatically.
2). If the illumination is under 10 lux, the IR LEDs will be turned on automatically during
the video recording process. The IR distance is 1.5 meters.
3). Video Resolution: 1280×720P Video Format: AVI
4). Loop recording is supported.
3.3. MOTION DETECTION RECORDING
3.3.1. The bulb camera will be powered on automatically when connected to an
outlet power supply. The power indicator light will be solid red. Both red and blue
indicator lights will be illuminated for 7 seconds. Then the red indicator light will
turn off, while the blue one will blink twice and turn off. The camera will start
recording video automatically.
3.3.2. Press the Video Recording Button once to stop recording video. The blue
indicator light will stay illuminated, indicating the camera has entered into
standby mode.
3.3.3. Press the Motion Detection Button once to enter into motion detection
recording mode and the blue indicator light will keep flashing slowly. A video file
will be generated and saved every 30 seconds automatically.
3.3.4. Press the Motion Detection Button once again to exit motion detection
recording mode. The blue indicator light will stay illuminated, indicating the
camera is back to standby mode.
3.4. STILL/CAMERA PHOTOGRAPH
3.4.1. The bulb camera will be powered on automatically when connected to an
outlet power supply. The power indicator light will be solid red. Both red and blue
indicator lights will be illuminated for 7 seconds. Then the red indicator light will
turn off, while the blue one will blink twice and turn off. The camera will start
recording video automatically.
3.4.2. Press the Video Recording Button once to stop recording video. The blue
indicator light will stay illuminated, indicating the camera has entered into
standby mode.
3.4.3. Press the Camera Button once to take photos. The camera will take a
photo every 3 seconds automatically and the indicator light will flash red once
every 3 seconds.
3.4.4. Press the Camera Button once again to stop taking photos continuously.
The red indicator light will turn off while the blue one will stay illuminated,
indicating the camera is back to standby mode.
IV. Video/Image File Uploads
4.1. Power off the bulb camera, remove the Micro SD card and insert it into a
card reader.
4.2. Insert the card reader into a proper PC computer USB port.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the “DCIM” folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, open the
txt file named “time.txt”. If you can’t find it, then you could create a txt file named
“time.txt”.
5.5. Write the current date and time in the file“time.txt” with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.03.08 14:24:32). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.
VI. Resetting
If for any reason the bulb camera stops responding or isn’t working properly, a
quick reset will restore it back to normal operation.
Operation:
When the camera is powered on, hold down the Reset Button for 3
seconds to restore your camera to factory settings. Both red and blue indicator
lights will go off and the bulb camera will shut down automatically.
8. AV Cable Port
9. Power Button
10. Motion Detection Recording Button
11. Camera Button
12. PREV Button
13. Video Recording Button
14. NEXT Button
