Wisenet WRN-1610S, Руководство по техническим характеристикам продукции

Страница: 10 / 20

10_
installation
installation
4.
Connect the cable to the HDD by matching the HDD
SATA/power cable number to the HDD position number
on the bracket.
`
For the HDD location number on the bracket, please refer to the
figure below.
5.
Mount the bracket on which an additional HDD is
mounted on the NVR, secure it with screws and connect
the SATA/power cable to the connector on the main
board by matching the number.
`
For the connector numbers, please refer to the figure below.
6.
After ensuring that there is no problem with the
connection terminal and routing inside the product, close
and secure the cover using the screws.
4
1
1
2
2
3
3
4
How to install an HDD in WRN-810S
1.
First, loosen the screws on the left/right sides and the
rear side, and remove the cover.
2.
After connecting one end of the HDD power and data
cable to the HDD, connect the other end to the
connector on the main board.
`
See the images for the HDD location number and connect number
of the bracket.
J
`
Gently press the connector before removing the HDD.
Do not force to pull the cable.
3.
Using the provided screws, mount the HDD to the
bottom cover.
J `
Up to two HDDs can be installed. The number of installable
HDDs varies for each model.
4.
After ensuring that there is no problem with the
connection terminal and routing inside the product, close
and secure the cover using the screws.
1
1
2
2