Wisenet SNZ-6320, Быстрое руководство

Страница: 4 / 8

4_ English
manual netWork setup
Run < Ip Installer_v2.XX.exe > to display the camera search list.
At the initial startup, both [ auto set ] and [ manual set ] will be grayed out.
M
`
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this
function.
a
Select a camera in the search list.
b
Click [ manual set ].
The Manual Setting dialog appears.
c
In the < address > pane, provide the necessary
information.
d
In the < port > pane, provide necessary
information.
•
HTTP Port : Used to access the camera using
the Internet browser, defaulted to 80.
•
VNP Port : Used to control the video signal
transfer, defaulted to 4520.
e
Enter the password.
The default password is “ 4321 ”.
J
`
In the IP installer, you can use the initial password,
“ 4321 ” to set IP Address, Subnet Mask, Gateway,
HTTP Port, VNP Port, IP type. After changing the network interface, for better security, access the web viewer and
change the password.
`
If you want to set the password, refer to “ Password setting ”. (page 5)
f
Click [ ok ].
Manual network setup will be completed.
a
b
d
e
f
c