14
· English
precautions
•
The wireless network access may fail, depending on the communications
environment.
•
For details about the network settings and password, contact your network
administrator or service provider.
•
For a specific Internet service requiring user authentication, you may not access
the service. If this is the case, contact the service provider.
•
Do not access the unauthorized network.
•
The farther the distance from the Wireless Access Point, the longer time the
network connection may take.
•
If you fail to access the selected wireless network, try a different Wireless
Access Point to make access.
•
For more information about the router or the wireless connection, refer to the
documentation of the router or contact the router manufacturer.
•
If the product is connected to a multiple-Wireless Access Point network
environment, some video packets may be lost, depending on the network traffic
load.
•
According to the network policy of the Internet service provider (UDP blocking),
video reception may be limited to 7 minutes.
•
In addition to the above situations, you may encounter a network delay or
interruption due to the network conditions.
Network Connection and Settings
Connection using the BlE function
1.
Connect the power adapter to the product.
2.
When the power is connected, the power status LED lights up in red and
starts blinking when boot-up is complete.
This is the BLE Enable state. When using BLE, keep the camera and mobile
within 5ft (1.5m).
3.
Register the product following the instructions in the mobile guide.
4.
When the product is connected to the server, the LED will illuminate in green.
n
`
You can connect in relay mode if the router doesn't have UPnP.
Configuration may differ depending on the router model.
Please refer to the router manual.
`
Please contact the service provider if you have difficulty connecting to the Internet.
RESET
RESET
Mobile
<Wireless Router>
BLE Signal
5ft(1.5m)
