manual netWork setup
Run <
Ip Installer_v2.XX.exe
> to display the camera search list.
At the initial startup, both [
auto set
] and [
manual set
] will be grayed out.
M
`
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
a
Select a camera in the search list.
b
Click [
manual set
].
The Manual Setting dialog appears.
c
In the <
address
> pane, provide the
necessary information.
d
In the <
port
> pane, provide necessary
information.
•
HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80.
•
VNP Port : Used to control the video
signal transfer, defaulted to 4520.
e
Enter the password.
The default password is “
4321
”.
J
`
In the IP installer, you can use the initial password, “
4321
” to set IP Address, Subnet Mask,
Gateway, HTTP Port, VNP Port, IP type. After changing the network interface, for better security,
access the web viewer and change the password.
`
If you want to set the password, refer to “
Password setting
”. (page 5)
f
Click [
ok
].
Manual network setup will be completed.
b
a
d
c
e
f
4_
English
