Wisenet SHD-3000F5, Руководство по установке

Страница: 6 / 12

6_ SHD-3000F5
5. Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the
ANCHOR BOLT as below:
❶
Tighten the NUT (“N1”) on the ANCHOR BOLT .
➋
Insert the provided SAFETY BRACKET into the ANCHOR BOLT .
➌
Tighten two NUT s (“N2”,”N3”) onto the ANCHOR BOLT .
➍
Hook and fi x one end of the SAFETY WIRE onto the SAFETY BRACKET .
➎
Hook and fi x the other end of SAFETY WIRE onto the HOUSING as shown below:
ANCHOR BOLT
Nut (N1)
Safety BRACKET
Nut (N2,N3)
SAFETY WIRE
ANCHOR BOLT
HOUSING
CEILING
CEILING
M

The ANCHOR BOLTs and nuts are not included in the product package.

ANCHOR BOLTS must be able to sustain the weight of at least 30 kg.

If you proceed without following the instructions in the manual, that is if you work with the
camera body already attached from the beginning, the safety wire could exceed its limit
and be broken
if
the housing is accidentally dropped, which could result in an accident.
➏
After fi xing the SAFETY WIRE to the HOUSING, tighten the screw in the SAFETY RING to the end.
6. In the case that
a
pipe is to be connected to the External Cable hole, the pipe must be
inserted within the depth of 15mm or less.
Less than 15mm