Wisenet ARN-1610S, Руководство по техническим характеристикам продукции

Страница: 10 / 15

10_
installation
installation
3.
Use the screws to fix the hard disk to the bottom of the recorder.
USB
REC
LAN
POWER
4.
Make sure that there is no problem in the connection port and routing inside the recorder, and then fix it
using screws after closing the cover.
■
When closing the cover, be careful not to damage the cable.
USB
REC
LAN
POWER
Installing the HDD
■
If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD
manually in the set before use. To learn how to format, see "
Device/Format " in the User Manual.
arn-410S/arn-810S
■
The following figures are based on Model ARN-410S .
1.
Loosen the screws on the back and slide the cover back to remove it.
USB
REC
LAN
POWER
2.
Connect the SATA/power cable of the hard disk to the connector of the main board.
USB
REC
LAN
POWER
■
Gently press the connector before removing the HDD. Do not force to pull the cable.