11. Installation
1) Install in a place devoid of moisture, vibration, dust or corrosive gas.
2) Avoid areas that might exceed the temperature ranges specified in this manual.
3) Make sure to protect from lightning or steam.
4) Avoid areas with direct sun light.
5) Use M5 nuts and bolts to mount on a panel or wall using the mounting holes.
If mounting brackets are used, make sure it is installed securely.
6) Inlet tube should be flexible not to strain the pressure indicating switch.
7) Please use specified wrench.
12. Wiring
1) Do not stress the main body.
2) Please use proper PVC insulated wire or captire cable.
3) Use M4 crimps to connect terminals for solid contacts.
4) Please confirm contact types in the diagrams before connecting terminals.
5) In case of conduit type, use waterproof sealing fittings.
6) In case of cable gland type, use waterproof cable glands.
