Wisdom STS, Руководство пользователя

Страница: 8 / 13

STS WISDOMAUDIO.COM 8
Making the STS Connections
As with any system, you should make changes to the connections only when the power
is turned off to avoid any chance of inadvertently causing a problem (such as a short-
circuit).
We recommend using heavy-gauge speaker wire, the gauge will vary dependent on your
speaker run length. Please consult an authorized dealer to determine what gauge would
be best for your application.
For the purposes of this manual, we will assume that you have already connected the
surround processor as per the instructions found in its manual. As such, you should have
signal coming from your source component(s) to a preamp/processor that provides bass
management (to create the subwoofer channel(s), the signal for the sub- woofer is sent
to a high-quality amplifier such as the Wisdom Audio SA Series amplifiers.
Connect the outputs of your amplifier to the subwoofer, taking care to get the polarity
correct. Connect the positive (+) terminals on your amplifier to the positive (+) terminals
on the STS; likewise, connect the negative (–) terminals on the amplifier to the negative
(–) terminals on the STS.