Wisdom Sage L150i, Руководство пользователя

Страница: 5 / 28

5
Description
Your Sage L150i loudspeakers take advantage of
several critical technologies to deliver a level of
performance that has never been available in a
loudspeaker that intruded so modestly on your
living space. In fact, this level of performance has
rarely been attained, regardless of the space and
budget at one’s disposal.
Since most of these technologies cannot readily be
found elsewhere, we will take the time to describe
them in more detail than would be necessary for
more conventional designs.
Planar magnetic panels
Our planar magnetic drivers use an advanced, thin
film membrane to move the air. This film can re-
spond instantly to the smallest detail in the signal.
It has vastly less inertia than traditional “cone &
dome” drivers, so the signal is never blurred in any
way.
The motive
force is provided by a “voice coil” that is
printed on the film, which is suspended in a
strong magnetic field provided by neodymi-
um magnets behind and in front of the film.
The ratio of available force to the moving
mass is huge, which means that the diaphragm does exactly what it is told; noth-
ing more, nothing less.
Free from compression
One of the most remarkable things about the sound of well-designed planar
magnetic speakers is their lack of thermal or dynamic compression. There are
several reasons for this:
• The lightweight diaphragm responds quickly to even the smallest
signals, yet is robust enough to handle enormous ones.
• The fact that heat does not build up in the voice coil (as it does
in conventional dynamic drivers) means that the load seen by the
amplifier does not change at high power levels.
When you become accustomed to the sound of your new Sage L150i speakers,
conventional speakers sound a bit bland and lifeless.
More reliable
The “voice coil” in the planar magnetic driver is spread out over a large, flat area
that is exposed to the open air. As such, when a huge transient comes along,
any heat that is generated is immediately dissipated. This compares quite favor-
ably to other designs in which the voice coil is buried inside a massive piece of
metal, where the heat has effectively no place to go.