background image

 

SAGE SERIES C225i 

 

WISDOMAUDIO.COM 

10 

Care and Maintenance 

To remove dust from the front of your C225i, use a feather duster or a lint-free soft 
cloth. 

 

To remove stubborn dirt and fingerprints from the grille, we recommend isopropyl 
alcohol and a soft cloth. Lightly dampen the cloth with alcohol first and then clean 
the grille of the C225i with the cloth. Do not use excessive amounts of alcohol –
there is no need for the cloth to be wet; merely damp is better. 

 

Never attempt to clean the drivers themselves. 

 

 

 
 
 
 

North American Warranty 

Standard Warranty 

When purchased from and installed by an authorized Wisdom Audio dealer, 
Wisdom Audio loudspeakers are warranted to be free from defects in material and 
workmanship under normal use for a period of 10 years from the original date of 
purchase.  

Furthermore, the transducers (“drivers”) in your Wisdom Audio speakers are 
warranted to be free from defects in material and workmanship under normal use 
for a period of 10 years from the original date of purchase.  

Harsh Conditions Use 

Wisdom Audio loudspeakers are designed for installation and operation in 
environmentally controlled conditions, such as are found in normal residential 
environments. When used in harsh conditions such as outdoors or in marine 
applications, the warranty is three years from the original date of purchase.  

CAUTION! 

Do not touch the surface of the planar magnetic drivers, under any 
circumstances.

 The thin film has been carefully pre-tensioned at the factory; any 

subsequent contact can only damage it. 

 

 

Содержание Sage C225i















Отзывы: