background image

5

Description

Your Insight Series P6i loudspeakers take advantage of sev-
eral critical technologies to deliver a level of performance 
that has never been available in a loudspeaker that intruded 
so modestly on your living space. In fact, this level of perfor-
mance has rarely been attained, regardless of the space and 
budget at one’s disposal. 

Since several of these technologies cannot readily be found 
elsewhere, we will take the time to describe them in more 
detail than would be necessary for more conventional de-
signs.

Planar magnetic drivers

Our planar magnetic drivers use an advanced, thin film 
membrane to move the air. This film can respond instantly 
to the smallest detail in the signal. It has vastly less inertia 
than traditional “cone & dome” drivers, so the signal is never 
blurred in any way. 

The motive force is pro-
vided by a “voice coil” 
that is printed on the 
film, which is suspended 
in a strong magnetic 
field provided by pow-
erful magnets behind 
and in front of the film. 

The ratio of available force to the moving mass is huge, which means that the 
diaphragm does exactly what it is told: nothing more, nothing less.

Free from compression

One of the most remarkable things about the sound of well-designed planar 
magnetic speakers is their lack of thermal or dynamic compression. There are 
several reasons for this: 

•  The lightweight diaphragm responds quickly to even the smallest 

signals, yet is robust enough to handle a great deal of power. 

•  The voice coil is laid out flat and is exposed to the air on both 

sides; the large resulting surface area dissipates heat extremely 
quickly and efficiently.

•  Since heat does not build up in the voice coil (as it does in con-

ventional dynamic drivers), the load seen by the amplifier does 
not change at high power levels. 

When you become accustomed to the sound of your new Insight Series P6i 
speakers, conventional speakers sound a bit bland and lifeless. You may also 
discover yourself hearing details at even modest levels on the P6i that were pre-
viously inaudible even at loud volumes on more conventional speakers. 

More reliable

The “voice coil” in the planar magnetic driver is spread out over a large, flat area 
that is exposed to the open air. As such, when a huge transient comes along, 

Содержание Insight P6i



















Отзывы: