Wirz Ortho Mechanics LegholderRX, Инструкция по эксплуатации

Страница: 5 / 8

Place the LegholderRX
®
sideways,
with the stirrups facing outwards and
with the highest bracket at the end
of the corresponding side from the
foot end of the operating table.
Insert the Velcro straps through the
oblong hole with the drawing facing
upwards.
1 2
Position the LegholderRX
®
definitively and pull with approx. 5kg
tensile force (50N) with the Velcro
straps in the opposite direction.
Note: The surgical underpad must be separated or cut through across one half
of the leg support in the gap to the opposite leg support during assembly.
Pull until the Velcro straps pass
completely through to the end bolt
locks and rotate the LegholderRX
®
to the correct position.
Insert the Velcro straps through the
second oblong hole.
4
MOUNTING SHORT VELCRO STRAPS OVER ONE HALF
OF THE LEG SUPPORT
MOUNTING LONG VELCRO STRAPS OVER ONE HALF
OF THE LEG SUPPORT
With the long Velcro straps, the LegholderRX
®
can also be fastened over only
one half of the leg support. Proceed in the same way as with the short Velcro
straps, but wrap the Velcro straps around the LegholderRX
®
once more.
5
3