WIRTH OKTOPUS GLASS-Jack GL-CC 1200, Руководство по эксплуатации

Страница: 15 / 36

O p e r a t i n g I n s t r u c t i o n s
OKTOPUS
®
GLASS-Jack
GL-CC 1200
Technical Documentation
BA 000 257
Page 15 of 28
3.1.1 Changing the battery pack
In order to change the battery pack, perform the following steps one after another:
⇒
Unlock and then open the cover of the battery casing.
⇒
Pull the battery pack out of the battery casing using the handle.
⇒
Put the battery pack on an even surface, as shown in fig. 7.
⇒
Push the charged battery pack, the socket of the battery charger facing upwards, into
the battery casing as far as possible. The electrical contact is established automatically
to the electric system of the OKTOPUS
®
.
⇒
Close the cover of the battery casing and lock it.
Make sure that the cover of the battery casing is correctly locked before
you start working with the OKTOPUS
®
GLASS-Jack GL-CC 1200!
Never place the battery pack on its side as this may lead to damages of the
battery charger socket
Fig. 7:
Battery pack
3.2 Vacuum supply
The vacuum supply is effected by a battery operated vacuum pump. Starting at the vacuum
pump the OKTOPUS
®
GLASS-Jack GL-CC 1200 is designed redundant, i.e. all following
components such as non-return valve, vacuum reservoir, pressure controller, vacuum gauge
and suction pads exist twice (2 Vacuum circuits).
The 2 vacuum circuits OKTOPUS
®
GLASS-Jack GL-CC 1200 are marked by different colors,
one color per vacuum circuit (blue and red). Make sure that only vacuum hoses and cou-
plings of the same color are interconnected.
The OKTOPUS
®
GLASS-Jack GL-CC 1200 mounted to the crane is ready for use, when a
sufficient vacuum level is reached in both vacuum tanks. The current vacuum level is con-
stantly indicated on the vacuum gauges (fig. 8).
Locking battery casing Cover battery casing
Battery pack
Battery charger socket
Handle battery pack