
wiREVO HSH200 User Manual Preliminary version 0.4
Before using
1. Turning ON/OFF
z
To turn on the stereo headset, push the power switch ( ) to the direction for ‘ON’.
z
To turn off the stereo headset, push the power switch ( ) to the direction for ‘OFF’.
2. Paring with a Bluetooth audio device
You need to pair the stereo headset with the Bluetooth audio device that you intend to use it
with.
This process is to set-up a unique wireless link between two devices.
Once you have paired your stereo headset with the Bluetooth audio device, you don’t need to
pair it again if you don’t delete all registered data from your device.
[When you use the stereo headset for the first time]
z
It’s better to try to pair your stereo headset with the Bluetooth audio device close-by.
z
When you turn on the stereo headset, you can check the Bluetooth Device Address
(ex.0008D600F097) of your stereo headset on the LCD.
You can distinguish your stereo headset from others using the unique number.
1. If the stereo headset is turned on for the first time, it will automatically be ready for pairing. In
this case, “Search me” & “wiREVO” are displayed in turn with one another for 3 minutes.
[Pairable mode]
2. Prepare your Bluetooth audio device according to the device’s user manual on pairing.
3. Continue following the instructions in the device’s user manual.
4. The default passkey of the stereo headset is
[0000]
.
5. When pairing has been completed, the stereo headset displays “Connect Pls” & “wiREVO” in
turn with one another. [Connectable mode]
Date: Jul. 13, 2006 Page 8 of 16
Hassnet Confidential Hassnet, Inc.