Page 2 of 15
1.2 Product feature
1. Low noise, high performance.
2. Total output power: 400~4000mW.
3. 8~32 uplink optical ports, for OLT.
4. 8~32 1550nm output optical port, multiply 1310/1490 data stream.
5. Perfect RS232 communication interface and SNMP function.
6. High-efficiency installation, easy operation, flexible.
7. High performance to price ratio.
1.3 Main Application
1. FTTP (EPON, GEPON)
2. Triple-play
2.0
SAFETY INFORMATION
2.1
Safety instructions
Do not plug-in/out output optic connector when the unit is under operating status
(KEY ON). Otherwise high power laser will burn the fiber core at the connector and
will cause low output power. If user need to plug-in/out or adjust the output
connector, firstly, please turn off the unit with key (KEY OFF).
2.2
Connector cleaning guide
Optical fiber connectors require care and careful cleaning. Caps should be left
on connectors whenever they are not in use. Do not touch the connector end.
Damage to connector end faces caused by improper care is not covered by
the warranty.
Cleaning procedure
WARNING:
After making sure that the light source is off (!), check the connector ferule
end using the connector inspection microscope. If no dirt, grease or small
particles are visible no further cleaning is necessary.
Use canned air to remove loose particles.
Either:
Use automatic connector cleaner such as “Cletop”. Wipe the
connector as directed on the box. Be careful with angled connectors
