Wirepath Surveillance WPS-300-CUB-IP, Руководство по установке

Страница: 55 / 67

55
© 2014 Wirepath Surveillance
WPS-300-CUB-IP Installation Manual
9.5.1.5. PIR Setting (Passive Infrared Sensor)
The WPS-300-CUB-IP is equipped with an external Passive Infrared Sensor (PIR) to sense motion in addition to the standard in-
camera motion detection. Use this sensor to detect people and animals passing through the field of view. The sensor works within
the following areas:
9.5.1.6. How to Set Up PIR
Enable
Check the boxes to enabled desired event actions when the sensor detects motion:
• E-Mail – check the box to send media via email. Requires configuration of Email Settings as
defined in section 9.3.8.2. Mail Settings .
• FTP – check the box to save media to an FTP site or server. Requires configuration of FTP as
defined in section 9.3.8.3. FTP Settings .
• Out1 (DO Out) – Check to activate the DO contact output to trigger a connected device contact
input. Requires connection and configuration of DO output as defined in section 7.3. Relay
Connections .
• SD Card – check the box to save media to a microSD card (if installed). See section 9.7. SD Card
Menu for more information about microSD card setup and use.
• Network Share – check the box to save media to a Network Share location. Requires the
configuration of Network Share as defined in section 9.3.8.4. Network Share Settings
• Audio Out – check the box to enable the WAV file selected below to play when events occurs.
WAV File
When PIR is enabled and the Audio Out checkbox above is selected, the WAV file sound selected from
the drop-down menu will play for the “Interval” selected below.
Interval
Selects the minimum time between motion events that the camera will respond to. Higher values are
useful to reduce notifications for camera scenes with more expected motion.
Uploaded
WAV File
Upload a custom .wav file to play when PIR events occur. File size limit: less than 100KB.
Format: 8KHz/16bit/Mono.
Record Wave
File
Press record WAV file to record a new audio clip. Then select “Record WAV File“from the list of WAV
Files above to hear the custom file when events record.
Click “Apply” at the bottom-right of the page to save modified settings.
5.11 ft.
26.5 ft.
8.53 ft. 8.53 ft.
56.4 ft.
10.2 ft.
10.2 ft.
16.4 ft.
9.84 ft.
4.26 ft. 4.26 ft.
5.11 ft.
35°
35°