MACTek BULLET™ – User Manual
DM1101010UAB
Copyright 2009-2010
23 of 33
ALERT – Burst Message Configuration Issue
Description:
A burst message is configured to a command that is not supported by the selected Sub-
device
Corrective Action:
Change the command number of the burst message to a command that is supported by
the Sub-device.
Timestamps:
Start: Set when the configuration issue if first detected
Stop: Set when the configuration issue is corrected
ALERT – Wired Device in Burst Mode
Description:
A wired device is configured for wired burst mode, which may conflict with the Bullet
burst settings.
Corrective Action:
Change the configuration of the wired device to not be in wired burst mode.
Timestamps:
Start: Set when the wired burst mode message is first detected
Stop: Set when the last wired burst mode message was detected
ALERT – Bullet Failed to Join the Network
Description:
The Bullet has failed to join the WirelessHART Network.
Corrective Action:
Check the Network ID and Join key set on both the Bullet and the WirelessHART
Network.
Timestamps:
Start: Set when the WirelessHART Network Join procedure failed
Stop: Set when the WirelessHART Network Join procedure succeeds
