W-DMX MicroBox G6
2022-09-30
While operating as a TX you can change between modes at any given moment:
1. Press the red function button rapidly 3 times.
2. Press and hold the red function button for at least 3 seconds.
3. Each time you press the red function button you will step through the available modes; this will
be indicated by the MODE LED.
4. Press and hold the red function button to save and exit.
NOTE:
When operating as TX, some modes are not supported.
NOTE:
All changes shall be made to the transmitter. It’s necessary to re-link all receivers after changing
control modes.
W-DMX™ Configurator app & Bluetooth
All configuration and operation can be performed from the W-DMX™ Configurator app that is available
from App Store on iOS and Google Play on Android.
W-DMX™ Configurator app, search for “W-DMX Configurator” on App Store or Google Play.
Setting PIN code
To avoid unauthorized access to W-DMX™ G6 devices, it is recommended to set a PIN code for your
device. This is done from the W-DMX™ Configurator app.
Reset PIN code
If you have forgotten your PIN code, you can reset it by following the following procedure:
1. Press the red function button rapidly 7 times.
2. Press and hold the red function button for at least 3 seconds.
3. The device will now reboot with the PIN code disabled.
Wireless Solution Sweden AB
11
