134
RT System 2 v2.3 Deployment Guide
R01.i
© 2010-2014 Wireless Seismic, Inc. All rights reserved.
5. Point-to-Multipoint Backhaul
Connecting to the Recording Truck
After the pendant radio link radios are configured and installed, log in to the PN radio and set
the power level to the minimum amount required to achieve communication with the RR.
To set the PN radio power level:
1
Click the Wireless tab.
2
Move the Output Power slider bar to the desired power level.
3
Click Change at the bottom of the window.
4
Click Apply Command at the top of the window.
5
Wait 30 – 60 seconds.
Figure 5–29 Wireless Tab