© 2018 Wireless Prime INC. All Rights Reserved.
Functional Instructions
23
Streaming Function
When using the functions in streaming mode, the transmitter needs to
switch to streaming mode. At this time, the word “RTSP” is displayed
on the transmitter’s OLED display, the SDI and HDMI at the receiver have
no video output, and the image is transmitted to the streaming media
software through the LAN port of the receiver for decoding display.
The streaming mode depends on software decoding. Comply with lots
of streaming media software. The following is an example of common VLC
streaming media software:After the transmitter and receiver establish a
network connection, the transmitter network indicator is always on,
the receiver network connection is normal; the transmitter is connected to
the HDMI or SDI video source, and the receiver’s network port is connected
to the streaming device.
Take the VLC of the PC as an example. After running VLC, select to turn on
the network stream.Fill in the address “rtsp://corresponding transmitter
encoding board IP address/media/live/0”. Click “Play” to start streaming.
Note that the transmitter must be connected to the video source, and the
IP address of the terminal streaming device (such as a computer) must be
the same network segment as the IP address of the encoding board.
Otherwise, the streaming will fail.
