Wi-Ex
zBoost YX500/510 Series Installation Guide
20
Will you be developing a zBoost that is compatible with my Nextel
phone?
Due to the FCC restructuring of the Nextel and Public Safety frequencies, we
have postponed development of the YX500-NEX unit until this transition is
completed.
Can I use my existing RG-59 cable to install my unit?
To answer your question, the cable that is currently in the wall is most likely a
cable we refer to as RG-59. It has been a common cable in use for cable TV
applications for the last 30 years. The cable we use with our unit is called RG-
6. It is most commonly associated with the satellite industry and is used over
RG-59 because of the lower signal loss that it provides, and to the extra
benefit of an increased run length. We would advise against using the RG-59
in any application with our unit.
There are usually several cell phones in use at one time in my home, will
your product boost all of our signals simultaneously?
The YX500/510 Series is designed to cover multiple signals simultaneously
and will allow multiple users to operate at the same time. For example, if there
were 8 people in the same room then the system would help each of them.
wpsantennas.com
(877) 594-5766
