Wireless Dynamics WDP318, Руководство пользователя

Страница: 13 / 47

WDP318 User Manual Ver. 00_04
13
Battery
Removing and placing battery
1
．
When removing the battery, please follow the following steps: A Push-up the spring fasteners; B Put up the battery and take it out.
2
．
When placing the battery, please follow the following steps: C Slide the battery downside trip downwards; D Slide the battery up towards the catch until it clicks into
place;
Charging a Battery
1
．
Make sure there is battery inside the phone.
2
．
Plug in electricity charger.
3
．
Connect the lead of electricity charger to the bottom of the phone.
4
．
By now, the mobile phone ‘s top right corner electric quantity icon on external display will flicker; if the phone has been closed when charging, charging indicating
frame will appear on the screen which represents that battery is in charging. Open the flip cover, same charge prompts can be seen on both internal and external display.
5
．
When electric quantity icon appears full on top right corner of display and stop flickering, it shows that charging has been completed. It is under normal conditions that
the phone and electricity charger will get hot during charging.
6
．
Disconnection AC supplies plug-in and disconnection the phone and electricity charger when charging is completed.
Charging wariness
：
„
Charging can be done during either switch on or switch off mode of the phone. Charging under switch on mode will not affect functions of use of phone.
„
Make sure that the hum voltage matches with normal voltage of the charger. Use favorable plug adapter.
„
Use only approved charger when charging. Using of unapproved charger may cause hazard and violate the phone authorization and guarantee repair items.
Use only manufacturer-approved battery. " Invalid battery" will appear on display when using unproved battery.
Battery using and disposing
„
Charging a Battery or replace battery when your mobile phone closes automatically or appears warning of insufficient electric quantity. The battery will
self-adjusting to lessen charging time if the battery has not been used up before charging.
„
Standby and hold time provided by manufacture is based on ideal working environment. The working time of battery varies with different network status, working
environment and usage mode during in-service use.
Environment protection wariness:
z
Please send the useless battery to local reclamation depot, manufacturers agent or customer service center for purposes of recovery utilization.
z
Do not drop batteries into fire, water or disposed as household garbage.
A B C D