5
WDIT Synthesizer POCSAG Transmitter (v3.0 on Nov.2013)
For M-810L, M-820L, M-840L, M-851L,NP-115L,TX-115L…
Tips to set up the programming parameters
1. Install the WDIT W1 programming AP execution file
2.
Click W1 and then run the programming software.
3. Connect the USB plug into the your device and the PC USB port .
Example Programming Screen as Below:
1. Capcode : 01-16 POCSAG address range 0000008-2097151 for POCSAG encoder option.
2. Tone A,B,C,D : For pager alert tone for POCSAG encoder option.
3. Type : For pager numeric or alphanumeric type selection.
4. Message : Pre-programming the encoder messages for pager contents
5. ID : For the ID call system such as each specific nurse ID set-up.
6. Data Rate : POCSAG data speed and baud rate in 512bps or 1200bps or 2400bps types.
7. Repeater : Each paging to be calling repeated times.
8. Send Battery Low Message :
✔
Sending the battery low alarm message by wireless
9. Activate the battery low alarm by any capcode 01-16 selection.
10. Buzzer sound :
✔
for the transmission beep sound.
