I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
I
I
n
n
s
s
t
t
r
r
u
u
c
c
t
t
i
i
o
o
n
n
s
s
I.
Introduction
This Installation Guide is for installers of the SBS and should be used
in conjunction with the main sections of this Owner’s Handbook.
Please read the Owner’s Handbook, especially Sections 1.1 and 2.1,
before proceeding.
II. Equipment
Requirements
The following items are required to complete installation of the SBS:
A Ku-band satellite receive antenna (TVRO). The SBS is
designed to operate with TVROs using a 'Universal LNB' -
having local oscillator frequencies of 9.750 GHz and 10.6 GHz
and tuning range between 10.7 GHz and 12.75 GHz. If the
TVRO has a Universal Quad LNB, in which each output is
separately powered and independently supplies high/low
vertical/horizontal to the terminated device, the SBS can be
connected directly to the LNB.
In some cases a multiswitch (for example the Triax TMS5X8P)
should be installed between the TVRO and the SBS:
►
With a Single Output LNB a multiswitch will enable the
TVRO to feed the television receiver(s) and the SBS
simultaneously.
►
With a Quattro LNB in which there are 4 outputs - each
output supplying different polarities or bands that cannot
Page 1
