Technology Overview
9
INSTALLATION
Follow the steps below to install the Wired 4DVD card into your computer.
!
Static electricity can damage your equipment. Do not take the board out of
its static protective bag until you are ready to work with it.
1)
Turn off the power to the computer and disconnect the power cord.
2)
Disconnect the monitor cable from your Macintosh.
3)
Open your computer so you have access to the PCI expansion slots. (Refer to
your MacÕs users manual for specific instructions.)
4)
Locate an available PCI slot.
5)
Remove the slot cover screw and slot cover, if applicable.
6)
Open the protective bag and remove the Wired 4DVD card
7)
Insert the card into the PCI slot. Press down gently on the top edges of the
board to seat it securely in the socket.
Insert the card into an
available PCI slot.
Содержание 4DVD
Страница 1: ...Wired 4DVD User s Guide ...
