Wiratech XBF-500, Инструкция по эксплуатации, Страница: 4 / 8

3
IV ． INDICATION OF STRUCTURE
V. OPERATION STEPS AND PRINCIPLE
Put the formed blister pieces in the mold first, and then, put the product, cover
the card, turn the disc worktable to the proper position. Turn on the travel
switch, turn the AC contactor. The pressure board pressurizes down side
automatically. The mold heating element is charged with electricity, heats and
cools to the fixed time, finish the sealing, then the pressure board returns to
the position. Then, revolve the disc worktable to be 120
°
, to make the second
worktable to enter into the working position. The three worktables can be
continuous working.