1.
Plug the fan into an electrical socket and switch on at
the wall.
2.
You can control your wall fan either with the twist
knob, or with pull cords.
3.
Pull on the cord to switch the fan on. At first start-up
the fan will operate at low speed.
4.
Pull on the same cord a couple of times to reach
desired fan speed. Choose between Low (1), Medium
(2) and High (3) fan speed.
5.
Pull on the other cord to switch on the oscillation mode.
Caution: The fan should always be switched off when making
this adjustment.
1.
Switch off and unplug from the power supply before
assembling or disassembling and cleaning.
2.
Keep the air vents at the rear of the main body free
from dust or fluff- use a vacuum cleaner to remove
these when necessary. Do not probe any opening to
remove fluff.
3.
Fan component parts should be cleaned using mild
soap and a damp cloth or sponge. Do not allow any
water or other liquid to enter the motor housing
4.
Thoroughly remove soap film with clean water.
CAUTION:
Do not use harsh detergents, chemical cleaners or solvents as
they may damage the surface finish of the fan components.
ENVIRONMENT PROTECTION
Dispose the appliance according to the local garbage
regulations. Never throw it away to the rubbish, so you will
help to the improvement of the environment.
HOW TO OPERATE
CLEANING INSTRUCTION
