1.
Press the switch up to I (soft wind), press the temperature
button, the temperature will be higher and higher. Press
the button of cool wind, then it is switched to (cool wind).
2.
Press the switch down to II (strong wind), press
temperature button, the temperature will be higher and
higher. Press the button of cold wind, then it is switched to
(cool wind).
3.
Press the switch to 0 (off).
4.
This product has an overload protecting set (if the air inlet
or outlet opening is obstructed), which can automatically
cut off the power. When you meet such situation, you’d
better press the switch to 0, after a few minutes you can
open and use it again.
5.
There is a wind-gathering mouth for you to gather the wind
to speed up drying and finalizing the design.
Our factory is responsible for any unqualified products or parts,
but if the damage which caused by incorrect operation, our
factory will not take any responsibility; if the product needs
reparation, send it to the local dealers with the related notes.
HOW TO OPERATE
REPARATION CARD
