Each comb attachment is marked accordingly on its
outside middle surface.
To attach a comb, hold it with its teeth upward and
slide it onto and along the clipper blade until the front
of the comb firmly seats against the clipper blade.
To remove the comb, simply pull the comb upward and
away from the clipper blade.
For even cutting, allow the comb attachment/cutter
through quickly. Also remember to comb the hair
frequently to remove trimmed hair and to check for
uneven strands.
4.
STEP 1 – NAPE OF THE NECK:
a)
Attach comb attachment 3mm or 6mm.
b)
Hold the Clipper cutting edge pointed up and begin
the haircut, starting at the center of the head at the
base of the neck (see diagram 1).
c)
Hold the clipper comfortably in your hand and hold
lightly against the head with the comb teeth pointing
upward. Gradually and slowly lift the clipper working
upwards and outwards, through
the hair, trimming just a little at
a time.
d)
As you cut, gradually lift the
Clipper head towards you.
Continue to cut the back area
from the bottom of the neck
upwards to the top of the ears.
5.
STEP 2 – BACK OF THE HEAD:
a)
Change to the next longest comb
attachment 9mm or 12mrn and
cut the back of the head (see
diagram 2).
