18
EN
DE
FR
WIPEKET
REGULAR INSPECTIONS
Switch off the machine before any maintenance and inspection.
• Perform a brief visual inspection before each cleaning. Pay particular attention to the side brushes,
the dust filter and the control panel.
• Check the functions of the ride-on sweeper weekly.
• Do the brushes fully descend?
• Do the side and main brushes rotate without problems?
• Does the spray emit water evenly?
• Does the machine accelerate smoothly?
• Does the machine brake reliably?
• Check the operation of the horn.
• Turn the steering wheel fully in both directions. Does the machine steer smoothly?
• Have the electrical system checked annually by a specialist.
MAINTENANCE
CHANGING THE MAIN BRUSH
Wear gloves when changing brushes as you may cut yourself on the bristles. Check the brush pressure and adjust the
placement if necessary.
1. Remove the 4 large mounting nuts (2 x M12 and 2 x M17)
to loosen the main roller suspension.
2. Remove the side splash guard, also by loosening
the 4 attached screws (4 x M10).
3. Remove the protection plate by loosening the 4 additional M10 screws.
4. Now the main roller can be pulled out and replaced.
Clean the main brush at regular intervals. Coarse dirt and smaller objects can settle on the brush and impair the
cleaning performance.
ADJUST THE HEIGHT OF THE MAIN BRUSH
1. Open the side cover.
2. Screw up the distance screw to raise the brush.
3. Unscrew the distance screw to lower the brush.
Do not lower the brush too far. If the brush has too much contact with the floor, it may be damaged,
which will affect the cleaning performance.