feeling for more
06
5. Safety Instructions
1. Place the tank horizontal when installing, do not tilt the pump. Check whether
the level drop is centered; if there is tilt, adjust the water level before using it.
2. Do not place electrical appliances or valuables under the condensate pump
to avoid loss caused by power failure or water leakage.
3. Non - professional personnel should not install it to avoid danger.
4. The condensate pump is not waterproof. Do not place it in the open air,
outdoors or in a place prone to flooding.
5. The condensate pump power supply needs to be independent to maintain
permanent power supply. For details of connecting with air conditioning
system, please refer to the wiring diagram.
6. It is prohibited that the water inflow is bigger than our stated flow rate, which
will easily cause the motor to work continuously and fail. Instant big water
inflow will also cause the condensate pump fail to discharge water in time,
leading to water leakage.
feeling for more
6. Installation Procedure
(
1
)
Make sure the probe in the tank is on the right side of the filter net, the filter net and
the upper cover are firmly mounted on the tank. (as shown below)
(2) Make sure the tank is placed smoothly and the outlet pipe of the air conditioner is
tightly connected with the water pipe of tank. (as shown below)
(3)
P12 Connect the vent pipe with the air hole. P12C don't need to connect
(4) Place the pump in the position beyond the ceiling. (as shown below)
05
P12
P12C
2
3
1
A
B
4
5
