hörbert – automatic shutdown – installation manual
Page 4/7
6.
Now unplug the blue and white cable of the built-in volume control from hörbert’s electronics in the same way.
Leave the volume control screwed into the cabinet.
Installation of automatic switch-off
The additional electronics for automatic shutdown are plugged in instead of the cables you just unplugged. The loose cable
of the volume control is then plugged into the additional electronics.
7.
Plug the blue and white cable of the automatic shutdown electronics into the same socket as the blue and white
cable of the volume control unit. This can be achieved with a bent tweezer, because the socket on the additional
electronics is visible from above without removing hörbert's electronics.