Wintriss SmartPAC2, Руководство пользователя

Страница: 109 / 383

1126700 SmartPAC 2 User Manual
4-12 Initialization Mode
3.
Select from the list of names the name that best describes the function of the selected cam
channel. You are returned to the Cam Channel Name Menu with the name you selected
displayed to the right of the selected channel.
To view names that appear below the MORE NAMES line, press the Down (

) cursor
key. A new name appears each time you press the Down (

) cursor. When you have
cycled through the complete list, the highlight bar returns to “UNNAMED,” the first item.
4.
If none of the names in the list seem suitable but you still want to name the cam channel,
you can select “CUSTOM NAME.” If you do so, the Alphabetic Entry window (see
Figure 4-5, page 4-8) displays.
5.
Key in a “custom” cam channel name, following the directions in the Alphabetic Entry
window, then press F6 to accept your entry. You are returned to the Cam Channel Name
Menu with the “custom” name you selected displayed to the right of the selected channel.
To cancel your selection, press RESET.
6.
When you are finished naming channels, press RESET to return to the Main Initialization
Menu.
AUTO ADVANCE and Slow RPM (Optional)
(INITIALIZATION – AUTO ADVANCE)
This item, which appears on the Main Initialization Menu only when ProCamPAC is installed,
enables you to set parameters that control the timing for up to two cam channels that are
programmed as Auto Advance. You make these settings on the Auto Advance Menu (see
Figure 4-10, page 4-13), which displays when you select the AUTO ADVANCE item.
You can use a separate computer keyboard to enter cam channel names. See page 4-45.
Cam channel names do not replace channel numbers. They simply provide a way to
identify channel numbers by their function.
NOTICE
NOTICE