
1147100
SmartPAC PRO Servo User Manual
44
Chapter 2
– Installation
NOTICE
INSTALL DIPROPAC AND/OR PROCAMPAC BOARDS IN CORRECT LOCATIONS
Install these boards in the locations shown in Figure 2-13, page 44. If you install a board in the
wrong location, SmartPAC PRO Servo will not recognize that the option is installed.
Eight-, 16-, and 32-channel configurations of the same option are interchangeable. When a board
is installed in the correct location, SmartPAC PRO Servo recognizes whether it is an 8-, 16-, or 32-
channel version of DiProPAC or an 8- or 16-channel version of ProCamPAC.
The following instructions describe how to add die protection and/or programmable limit switch
capabilities to a basic SmartPAC. If you ordered either of these options with your new SmartPAC
PRO Servo, the boards will have been installed at the factory, and you can skip to the wiring sections
for these modules. DiProPAC is available as an 8-sensor, 16-sensor, or 32-sensor board. You can
obtain the ProCamPAC board in 8-cam or 16-cam versions.
Wiring instructions for the DiProPAC board are provided starting on page 45. Wiring for the
ProCamPAC board is documented starting on page 49.
To install a new DiProPAC or ProCamPAC board, do the following:
1.
On the SmartPAC PRO Servo board, locate the connector in which the new board should be
installed (see Figure 2-13).
Figure 2-13. SmartPAC PRO Servo Board
–
DiProPAC Board, Right, Outlined in Red
CAUTION
DAMAGE TO BOARD FROM STATIC DISCHARGE
Ground yourself before touching circuit boards or chips by touching a large metal object such as
the press. Static electricity can destroy electronic components.
Failure to comply with these instructions could result in property damage.
Содержание SmartPAC PRO Servo
