Wintriss SmartPAC PRO Servo, Руководство пользователя

Страница: 137 / 228

SmartPAC PRO Servo User Manual 1147100
Chapter 5
– Program Mode
137
Figure 5-33. Tool Program Menu with DIPROPAC 1-16 and DIPROPAC 17-32 Items
When planning the sensors to be assigned to each DiProPAC 32 input, reserve sensor positions 1-16
for green sensors only. Also, if you are using multiple green sensors for the same function (e.g.,
transfer, stripper, slug detection, etc.), program only one of the sensor positions 1-16 for this
application, leaving sensor positions 17-32 for programming the remaining sensors in the group.
Programming Sensors 17-32 as Green, Green Quick Check, or Green Constant
To program a sensor in the group of sensors 17-32 as a green, green quick check, or green constant
sensor, do the following, referring to the appropriate sections of
Programming Sensor Settings , page
125) if necessary:
1. On the Tool Program Menu, Figure 5-33, select the DIPROPAC 17-32 item. The Die Protection
Sensor 17-32 Menu displays, Figure 5-34.
Figure 5-34. Die Protection Sensor 17-32 Menu