1143900
SmartPAC PRO Second Ethernet Port Installation
Instruction Sheet
June 2021
1143900
Second Ethernet Port Installation
Rev. A
Page 3
Wintriss Controls Group
978-268-2700
toll free 800-586-8324
4.) Carefully remove the mini PCIe network card from static bag and insert into P2 on
the HMI board and use the two screws included in the kit to secure the board.
Figure 2. Mini PCIe NIC Module Inserted into P2 Connector
5.) Next, connect the RJ45 pigtail to the J1 Connector on the module, loop the wire under the
HMI board and tie wrap to the standoff as shown in Figure 3 below.
Figure 3. Mini PCIe Module Pigtail with RJ45 Socket Installed
