manualshive.com logo in svg

Wintriss SmartPAC 2, Руководство пользователя, Страница: 523 / 604

Поделиться
Скачать
Wintriss SmartPAC 2 Скачать руководство пользователя страница 523

SmartPAC 2 with WPC 2000 Integration User Manual

1128600

Reporting Downtime and Scrap to LETS

I-19

Reporting Scrap and Good Parts to LETS

If you are running LETS-compatible firmware, SmartPAC 2 enables you to document scrap 
so that scrap counts can be reported to LETS.  The scrap counter, which appears on the 
Counters screen in Run mode, maintains a cumulative total of all user scrap entries for the 
currently running job, resetting to zero when the job is complete.

The cumulative scrap count reduces by that amount the number of good parts reported to 
LETS.  The good parts count is maintained in the Good Parts Count field on the Counters 
screen (see Figure I-13, page I-20).  If you wish to adjust the Good Parts counter upward, you 
can do so in up to 1,000-part increments in Run mode and in larger increments in Program 
mode.

To enable scrap entries and Good Parts counter adjustments to be made in Run mode, you 
must set the CHANGE COUNT and CHG GOOD PRTS CNT items on the Security Access 
Menu in Initialization mode to “PROGRAM AND RUN MODES,” as shown in Figure I-12.  
(To display the Security Access Menu, select SECURITY ACCESS from the Main 
Initialization Menu–see Figure I-4, page I-7.)

If you want to allow scrap entries to be made in Run mode but prevent Good Parts counter 
adjustments, you must set the CHG GOOD PRTS CNT item on the Security Access Menu to 
“NO CHANGES ALLOWED” while leaving the CHANGE COUNT item set to 
“PROGRAM AND RUN MODES.”

By default, the Good Parts counter does not increment during a fault condition.  If you wish 
the counter to increment even when there is a fault, set the COUNTER INCREMENT MODE 
item on the Position Sensor screen to “INC ALWAYS” (see page 4-8).

 

Figure I-12. Security Access Menu with CHANGE COUNT and CHG GOOD PRTS CNT

Items Set to “PROGRAM AND RUN MODES”

F1
F2
F3
F4
F5
F6
F7
F8

Содержание SmartPAC 2





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов