Wintriss SmartPAC 2, Руководство пользователя, Страница: 342 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
6-34 Run Mode
2.
Select a parameter you want to change. The Numeric Entry window (see Figure 5-3,
page 5-3) displays.
3.
Key in a new value, following the directions in the Numeric Entry window. For Yes/No
items, key in “0” for No, “1” for Yes. Press ENTER when you are finished. You are
returned to the Tool Number Information screen with your change displayed in the field
you selected in step 2.
4.
Repeat steps 2 and 3 to change other parameters, as necessary.
5.
To edit text in the memo box, press F5 for the first line, F6 for the second line. When the
Alphabetic Entry window (Figure 5-10, page 5-9) displays, key in your edits, following
the directions in the window, and press
F6 . The window closes, and your changes appear
on the memo box line you selected.
6.
When you have finished changing tool information, press RESET to return to the Main
Run Menu.
ERROR/EVENT LOG
(RUN – ERROR/EVENT LOG)
This item enables you to view a list, called the Error/Event Log (see Figure 6-27, page 6-35),
that displays in reverse chronological order the 100 most recent errors or events that have
occurred at the press or within SmartPAC 2.
The Error/Event Log is useful as a troubleshooting aid. Each time the press is stopped due to
a fault, the log records the error message, which gives the reason for the stop, and the stroke
count and crankshaft angle at which the stop occurred. When a new tool is loaded, the log
displays the tool number. If SmartPAC 2 is connected to a computer network and e-mail is
enabled, the log also shows messages sent by SmartPAC 2. When SmartPAC 2 is networked,
you can send the Error/Event Log to Wintriss Tech. Support (see
MESSAGING
, page 6-37).
Error messages displayed on the Error/Event Log are documented in Chapter 7.
To view the Error/Event Log, do the following:
1.
Select ERROR/EVENT LOG on the Main Run Menu to display the Error/Event Log.
2.
Use the cursor keys to scroll through the errors and events. When an error is selected, the
full text of the error message is displayed in the blue window at the bottom of the screen.
ARE YOU LOCKED OUT?
Access to items on this screen may be limited to Program mode or may require a
password. The security access settings in Initialization mode determine when changes
can be made. See Table 4-15, page 4-48.
For HELP with the Error/Event Log, press the HELP key when the screen is displayed.
NOTICE
NOTICE