Wintriss SmartPAC 2, Руководство пользователя

Страница: 298 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
5-44 Program Mode
3.
Set the On time in milliseconds (maximum is 500 mS, or 0.5 seconds), using the Up (

)
cursor key to increment the Time value displayed in the window and the Down (

) cursor
key to decrement the Time value. The Time value changes in increments of 10 mS. In
Figure 5-50, the On time is set to 350 mS.
4.
Press RESET when you are finished to return to the Cam Channel Program Type Menu.
Making an Auto Advance Setting
Figure 5-50. Cam Channel Timed Output Program Screen
FOR APPLICATIONS REQUIRING MORE THAN 500 MILLISECONDS
If you have an application where an On time of more than 500 milliseconds is required, do
the following. Program one of the batch counters to a preset of “1,” set the Counter
Increment Angle to the desired On angle and the Output Mode to PULSE. Then program
the Pulse Time to the cam On time you want (e.g., 600 mS). See
Setting Batch Counter
Output and Increment Modes
, page 5-13.
You can program up to two Auto Advance output settings in Program mode. The first advance
constant set in Initialization mode controls the lowest-numbered Auto Advance channel in
Program mode. Likewise, the second advance constant controls the next numerically higher Auto
Advance channel. If channels 3 and 5, for example, are programmed as Auto Advance, channel 3
will use the first advance constant, channel 5 the second advance constant. See
AUTO
ADVANCE and Slow RPM (Optional)
, page 4-12 for more information.
NOTICE
NOTICE