Wintriss SmartPAC 2, Руководство пользователя

Страница: 285 / 604

SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Program Mode 5-31
2.
Change the setting on the displayed screen.
3.
Press RESET when you are finished to return to the Sensor Settings screen.
4.
Repeat steps 1 through 3 for each setting you want to change.
5.
Press RESET when you have finished changing settings on the Sensor Settings screen.
You are returned to the Die Protection Sensor Menu.
Viewing the Sensor Summary
You can view a summary of the settings that have been made for all programmed sensors
shown on the Die Protection Sensor Menu, including the critical angle that has been set for the
tool. To view the summary, do the following:
1.
On the Die Protection Sensor Menu, press F6 (View Sensor Summary). The Sensor
Summary screen, shown in Figure 5-31, displays. This screen shows the sensor name,
sensor type, stop type, and the Ready signal On and Off angles for Green, Green Quick
Check, and Green Constant sensors or the stroke count for Green Special sensors.
Deleting a Sensor
To delete a Die Protection sensor, do the following:
1.
On the Die Protection Sensor Menu, select the sensor you want to delete. The Sensor
Settings screen displays.
2.
Select the Sensor Type. The Sensor Type screen appears.
3.
Select NOT USED. You are returned to the Die Protection Sensor Menu with the name of
the sensor you selected in step 1 removed and a caption specifying the sensor number
(e.g., SENSOR 1, SENSOR 2, etc.) displayed.
Figure 5-31. Sensor Summary Screen