AutoSetPAC User Manual
1101600
Chapter 5 Using AutoSetPAC in Run Mode
119
Clearing Tonnage History
To delete all the information in tonnage history, press the F6 (Clear History) function key on the
Tonnage History for Total Tonnage display. The following warning message (see Figure 5-13)
displays, asking you to confirm that you want to clear tonnage history.
Figure 5-13.
“Clear Tonnage History” Warning Message
NOTICE
USE CAUTION WHEN CLEARING TONNAGE HISTORY
Do not press the CLEAR key unless you are sure that you want to clear tonnage history. When
you press CLEAR, all tonnage history data is deleted and cannot be retrieved.
To confirm that you want to clear tonnage history, press the CLEAR key. (To cancel this action, press
RESET.)
Press RESET to return to the Tonnage Monitor Run Menu.
Recalculating Setpoints
NOTICE
If the RECALCULATE SETPOINTS function has been locked out of Run mode (see
, page 69), that item does not appear on the Tonnage Monitor Run Menu.
When you select RECALCULATE SETPOINTS on the Tonnage Monitor Run Menu, the warning
message shown in Figure 5-14 displays:
Figure 5-14.
Tonnage Monitor Run Menu: Recalculate Setpoints Warning Message
Press ENTER to confirm that you want to recalculate setpoints. The message
SETPOINTS WILL BE RECALCULATED
displays briefly on top of the warning message, and you are returned to the Tonnage Monitor Run
Menu. Setpoints are recalculated the next time you run the press and will appear on the appropriate
Adjust Setpoints display (e.g., High Setpoint Limits, Low Setpoint Limits, etc.) the next time you
access it.
Содержание AutoSet PAC 120 VAC
