3. The mouse consists of left, middle and right buttons. Precise optical trace.
(Resolution: 1000DPI, refresh rate: 3500fps). Flexible and smooth cursor control.
Precise tracing and operating.
4. The left and right buttons can be used more than one million times. Operation
voltage: 1.5V, current: 15mA. Safe to use. Convenient to operate.
Directions:
One
AA batteries are required to be put in with correct poles. And then
plug USB receiver into computer. Turn on the switch at the bottom of the mouse.
Then you can use it.
Attention:
Please protect it against water, dust and press.
Storage:
Avoid direct sunlight. Keep it in a shady and dry place.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
