4
INSTALLING BATTERIES:
To properly install batteries into your Mouse, please follow the instructions below:
1. Pull the Battery Compartment Release Latch at the bottom of your Mouse and remove the
Battery Compartment Cover from your Mouse.
Note
: Remove the Battery Compartment Cover from your Mouse gently, otherwise the
Nano Receiver stowed inside the battery bay will pop out.
2. Install two AAA Batteries into your Mouse following the battery orientation guide in the
battery bay, make sure the guide is under the batteries so that you can remove the
batteries out of the battery bay easily, then replace the Battery Compartment Cover back
onto your Mouse until it securely locks.
Note
: The LED at the bottom of your mouse will flash one time after Batteries have been
installed into your Mouse properly, the LED will remain on when the Nano Receiver is
connected to your computer.
Nano Receiver
LED
